pjphoto59
Member
I have a GR2 and find the handgrip is coming off. Two places are affected: The curved part at the top of the handgrip is bulging out leaving a gap about 2mm in the centre by the front wheel, and on the back the flat part by the 4-way controller is peeling up.
I would appreciate if anyone could advise what adhesive I could use to repair this.
Some time ago I had a similar problem on a Sony RX100. I repaired it with Superglue which was not satisfactory. The glue softened the rubber which expanded in size. The glue also squeezed out of the edge, unsightly and difficult to remove.
Any suggestions would be appreciated. . .
Peter
I would appreciate if anyone could advise what adhesive I could use to repair this.
Some time ago I had a similar problem on a Sony RX100. I repaired it with Superglue which was not satisfactory. The glue softened the rubber which expanded in size. The glue also squeezed out of the edge, unsightly and difficult to remove.
Any suggestions would be appreciated. . .
Peter